Level Sensors

NivuBar Plus II

Artikel Nr. HSB0 NBPX XXXX XXK

Hang-in probe with capacitive ceramic measurement cell

Submersible probe with 4 - 20 mA transmitter for hydrostatic level measurement in water and wastewater. Oil-free capacitive ceramic measurement cell

[Translate to English:] NivuBar Plus II – zur hydrostatischen Füllstandsmessung

[Translate to English:] NivuBar Plus II – Drucksonde mit Messumformer

Capacitive ceramic measurement cell
Large front-flush diaphragm
2-wire probe
High overpressure resistance
Integrated overvoltage protection

This hydrostatic level probe has been developed to meet the high demands of industry and environmental protection.
The stainless steel (1.4571) probe body is locked by a capacitive ceramic measuring cell at the bottom and is held by the self-supporting cable on the top.
The probe can be suspended by using a straining clamp.

The non-corrosive enclosure featuring protection IP68 permits universal use for reliable determination of levels in containers, basins, shafts and tanks. The large diaphragm has proven as very reliable, particularly in the wastewater sector.

NivuBar Plus II features ex approval II 1G Ex ia IIC/IIB T4 for Zone 0 as standard and can be installed in any explosive area.

Utilising the widely used 2-wire technology, the installation costs are very low.

Typical applications for NivuBar Plus II

Pump shafts
Channels
Stormwater treatment plants, storage sewers, retention tanks and discharge constructions
WWTPs (screening control, tank levels, sludge tanks, levels in open channels)
Industrial wastewater networks
and many more