Global
Level Sensors
HydroBar G II
Part No. HSB0 HGScrew-in with capacitive ceramic measurement cell
Screw-in probe with internal 4 - 20 mA transmitter for hydrostatic level measurement in water, wastewater and gases. Oil-free capacitive ceramic measurement cell.
![[Translate to English:] HydroBar G II – zur hydrostatischen Füllstandsmessung](/fileadmin/_processed_/5/7/csm_HydrobarG-sensor-1_a2b3c1e96a.png "[Translate to English:] HydroBar G II – zur hydrostatischen Füllstandsmessung")
Description
- Robust and reliable screw-in probe with 1.5“ threaded connection
- Capacitive ceramic measurement cell
- for slight to heavily polluted liquids, sludge and pasty media
- Large front-flush diaphragm
- 2-wire probe
- Ex Zone 0
- High overpressure resistance
- Integrated overvoltage protection
The hydrostatic level probe with G 1.5” thread has been developed to meet the high demands of industry and environmental protection.
The corrosion-proof encapsulation featuring IP68 protection rating allows to use the unit for reliable level detection in containers, tanks and pipelines. The large resistant ceramic diaphragm has proven particularly in the wastewater sector as well as in the chemical industry. Due to the front-flush diaphragm the unit can be used even in viscous media and pastes. Diaphragm failures are virtually eliminated.The HydroBar G II can be used in aggressive media such as acids and caustic solutions as well.
Utilising the widely used 2-wire technology, the installation costs are very low.The unit is optionally available with a 4-character LCD integrated into the enclosure lid for indication of measurement values.
Typical applications for HydroBar G II
- Pump stations
- Pipelines
- Containers and tanks
- Digester outlets
- Industrial applications
- and many more
Technical Data
| Common | |
|---|---|
| Load | 600 Ohm / 24 V 1000 Ohm / 32 V
|
| Outputs | 4 - 20 mA, 2-wire |
| Storage temperature | -40 °C to +100 °C |
| Permissible medium temperature | -25 °C to +125 °C |
| Operating temperature | -10 °C to +85 °C |
| Ex-Approval | II 1G Ex ia IIC/IIB T4, IBEx U05 ATEX 1193X |
| Long-term stability | ± 0,1 % FSO / year |
| Accuracy according to IEC 60770 | 0,25 % / 0,35 % FSO |
| Measurement ranges / permissible overpressure | 1 mH2O / 2 bar 2 mH2O / 2 bar 4 mH2O / 4 bar 6 mH2O / 4 bar 10 mH2O / 7 bar 20 mH2O / 10 bar 1 bar / 7 bar 2 bar / 10 bar 4 bar / 25 bar 6 bar / 25 bar 10 bar / 40 bar 20 bar / 60 bar special measurement ranges upon request
|
| Measurement principle | capacitive |
| Protection | IP 68 |
| Process connection | G1½” DIN ISO 3852 stainless steel 1.4571
|
| Enclosure | Stainless steel 1.4305 diaphragm: ceramics (AL2O3)
|
| Power supply | 12 to 36 V DC Ex: 12 to 28 V DC
|
Specifications subject to change.
Downloads
Declaration of Conformity "Pressure Probe"
